40g Qsfp To Sfp Adapter 10gbase Optical Module For Cisco
QSFP TO SFP10G Adapter,the Quad to Single Small Form Factor
Pluggable Adapter (40G QSFP+ to 10G SFP+ Adapter or QSA) is the
world's first solution for the QSFP+ to SFP+ conversion
challenge.The QSA enables smooth, cost effective, connections
between quad lane port such as 40 Gigabit Ethernet adapters using
QSFP+ ports and 10 Gigabit Ethernet hardware using SFP+ based
QSFP TO SFP10G Adapter conforms to the SFF-8431 SFP+ and SFF-8436
QSFP+ connector standards and is 100 percent tested to strict
quality requirements. The adapter is built in QSFP+ form factor
with a receptacle for SFP+ cable connector.
The QSFP TO SFP10G Adapter provides an integration solution for
systems using different vendors equipment, the QSFP TO SFP10G
Adapter is vendor agnostic and provides a direct path to the SFP
module memory. The QSFP TO SFP10G Adapter interoperates with all
major optical module and direct attached copper cables vendors. The
QSFP TO SFP10G Adapter design assures minimum loss on the
conversion path from the QSFP+ cage to the SFP+ receptacle. The
QSFP TO SFP10G Adapter is qualified for 10GbE SFP+ and 1GbE SFP
transceivers meeting the Small Form Factor Pluggable (SFP)
Transceiver Multi-source Agreement (MSA).
Secure latching mechanism
Low insertion loss
Operating case temperature: -20°C ~ +85°C
Storage Temperature: -40°C ~ +125°C
Supply Voltage: 3.15 ~ 3.45V
Networked storage systems
Data Center networking
InfiniBand Trade Association (IBTA)
40G QSFP Optical Module
|QSFP Optics Modules|| |
|QSFP-40G-SR4-S||Cisco 40GBASE-SR4 QSFP Module for MMF|
|QSFP-40G-LR4-S||Cisco 40GBASE-LR4 QSFP Module for SMF|
|QSFP-40G-SR-BD||Cisco 40GBASE-SR Bi-Directional QSFP Module for Duplex MMF|
|QSFP-40G-BD-RX||Cisco 40GBASE-SR Bi-Directional QSFP Monitor Module for Duplex MMF|
|QSFP-40G-SR4||Cisco 40GBASE-SR4 QSFP Module for MMF|
|QSFP-40G-CSR4||Cisco 40GBASE-CSR4 QSFP Module for MMF|
|QSFP-40G-LR4||Cisco 40GBASE-LR4 QSFP Module for SMF with OTU-3 data-rate support|
|QSFP-40G-ER4||Cisco 40GBASE-ER4 Module for SMF with OTU-3 data-rate support|
FAQ(Frequently Asked Questions)
1. Can I have a sample order?What is your MOQ?
Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable,We do not have MOQ,1 sample is available.
2. What is the lead time?
For usual products,We keep stock,could ship 1~3 days after PO.For
big quantity and special products,Please check lead time with our
3. Dose your modules compatible to CISCO.(HP/Extreme/Juniper,ect)
Yes,we code the optical transceivers compatible to
4. What is your warranty time
We promise 3 years warranty for all products shipped from us.
5. Could I use our own logo and label?
Yes,we could provide a OEM service and make the products with your